Home > Products > LF-THS 16k 51.2v 314Ah Battery

Indoor OEM Floor-Standing LiFePO4 Battery

LF-THS 16K 51.2V 314Ah Floor-Standing LiFePO4 Battery

MODEL · LF-THS 16K

LF-THS 16K is a 51.2V 314Ah floor-standing LiFePO4 battery providing 16kWh nominal energy for protected indoor solar storage installations. It is rated for 200A maximum charge/discharge current, CAN and RS485 communication, IP20 protection and up to 16 parallel units. The brochure also identifies OEM support; branding, firmware, documentation and order conditions must be confirmed for each project.

51.2VNominal voltage
314AhNominal capacity
16kWhNominal energy
200AMaximum current
CAN · RS485Communication
IndoorIP20 enclosure

For distributors, private-label programmes and installers that need an indoor 16kWh low-voltage battery with local status visibility and service-side access.

Technical values are based on the supplied LeforESS catalog and remain subject to the selected model datasheet.

LiFePO4Battery chemistry
IP20Protection level
16 UnitsMaximum parallel quantity
>8,000Cycles at 80% DoD, 25°C
129kgProduct weight
0-45°CStorage temperature

Indoor Project Platform

An Indoor 16kWh Battery for OEM and Installer Projects

LF-THS 16K uses the same 51.2V and 314Ah electrical class as a high-capacity low-voltage battery, but its IP20 enclosure and visible service arrangement make installation environment and access central selection criteria.

01

Protected Indoor Energy Rooms

Install in a dry, controlled location with adequate access, protection and clearances for a 129kg floor battery.

02

Installer-Managed Residential Storage

Use the front status display and service-side connections as part of a documented commissioning and maintenance process.

03

Distributor and OEM Programmes

Evaluate the model as a private-label platform only after the available branding, firmware, documentation and MOQ are confirmed.

Verified Product Data

LF-THS 16K Technical Data

The specification table uses the values assigned to LF-THS 16K on brochure page 11.

ElectricalNominal voltage51.2V
Nominal capacity314Ah
Nominal energy16kWh
Maximum charge/discharge current200A
Maximum parallel quantity16 units
BatteryChemistryLiFePO4
Cycle life>8,000 cycles at 80% DoD and 25°C
CoolingNatural cooling
CommunicationInterfacesRS485 / CAN
MechanicalInstallationFloor mounting with moveable rollers
Dimensions (H x W x D)717 x 500 x 240mm
Weight129kg
EnvironmentOperating temperature0-55°C
Storage temperature0-45°C at 60% +/- 25% RH
ProtectionProtection levelIP20
CertificationListed in brochureIEC 62619-CB, CE-EMC, UN38.3 and MSDS

Product specifications and configuration options must be confirmed against the selected model datasheet before ordering. OEM support is stated, but the brochure does not define branding options, firmware scope, MOQ, lead time, packing or warranty. Keep those items conditional until confirmed in the quotation.

LF-THS 16K battery angled view showing display and service-side connections

Access & Commissioning

Service Access, Display and Indoor Placement

The product images show a front display and a recessed service area. The brochure does not define the display functions or individual port assignments, so those details must come from the selected manual rather than marketing copy.

Status displayA front display is visible on the enclosure. Confirm the screen pages, alarms and language options for the ordered firmware.
Service sidePower and communication connections are visible in the recessed side area. Confirm connector types and isolation procedure.
Indoor protectionIP20 requires a protected installation location. Do not treat the enclosure as weather-resistant.
OEM scopeOEM support is stated in the brochure, but branding, software, packaging, certification scope, MOQ and lead time remain order-specific.

Technical Buying Questions

LF-THS 16K Procurement Questions

Where should an IP20 battery be installed?

Use a protected indoor location that controls water, dust, temperature and access. The final room and electrical installation must comply with local rules.

What information is available on the front display?

The display is visible in the product image, but its screens and functions are not defined in the brochure. Confirm them using the current user manual and firmware version.

What does OEM support include?

The brochure confirms OEM support only at a general level. Branding, enclosure changes, firmware, packaging, certificates, MOQ and lead time must be agreed in writing for the selected order.

Can 16 units be connected in parallel?

Sixteen is the brochure maximum. The practical quantity still depends on inverter support, protection design, cabling, communication addressing and commissioning rules.

Does it support RS232 communication?

RS232 is not listed for LF-THS 16K. The brochure lists CAN and RS485, so do not specify RS232 unless a current datasheet confirms it.