Three-Phase Low-Voltage Hybrid Inverter
Deye SUN-10K-SG05LP3-EU-SM2 10kW Hybrid Inverter
MODEL · SUN-10K-SG05LP3-EU-SM2
A 10kW three-phase hybrid inverter for 48V-class battery storage, new PV systems and AC-coupled retrofit projects. It gives distributors, installers and EPC buyers a current Deye model for low-voltage battery projects without duplicating LeforESS's generic 10kW inverter page.
Use this page for Deye-specific procurement intent; keep the existing LeforESS 10kW inverter page focused on the private-label LF-SEI-10K-UP platform.
Technical values are limited to the named sellable configuration and must be checked against the current model datasheet before ordering.
10kW Three-Phase Projects
A Branded Low-Voltage Hybrid Option for Installer and EPC Quotes
This model covers a high-intent 10kW inverter-and-battery search cluster while keeping the electrical architecture clear: three-phase AC with a 40-60V battery input.
Three-phase solar plus storage
Use for 220/380V or 230/400V projects where the grid code, backup plan and 48V-class battery bank are verified.
Existing-PV retrofit
AC coupling is supported, but the existing inverter, meter, export-control method and protection scope still require engineering review.
Installer and distributor supply
Quote the exact SM2 model, approved battery, monitoring option, destination approvals and after-sales route.
Verified Product Data
SUN-10K-SG05LP3-EU-SM2 Technical Data
The values below are limited to the 10kW model in Deye's current SG05LP3 technical table. They are not copied from the older SG04LP3 model shown on an existing Leforsolar system page.
| Battery | Battery type | Lead-acid or lithium-ion |
|---|---|---|
| Battery voltage range | 40-60V | |
| Max charge/discharge current | 210A | |
| Lithium strategy | Self-adaption to BMS | |
| PV | Max PV access power | 20,000W |
| Max PV input power | 16,000W | |
| Max PV input voltage | 800V | |
| MPPT range | 200-650V | |
| MPP trackers / strings | 2 / 2+2 | |
| AC | Rated AC input/output power | 10,000W |
| Max apparent power | 11,000VA | |
| Rated voltage | 220/380V or 230/400V; 3L+N+PE | |
| Off-grid peak | 2 times rated power for 10 seconds | |
| Performance | Max efficiency | 97.6% |
| Euro efficiency | 97.0% | |
| MPPT efficiency | >99% | |
| General | Communication | Wi-Fi, RS485, CAN |
| Protection rating | IP65 | |
| Dimensions | 386 x 660 x 250mm, excluding connectors and brackets | |
| Weight | 35.2kg |
Product specifications and configuration options must be confirmed against the selected model datasheet before ordering. Warranty is listed by Deye as 5 or 10 years depending on the final installation site and warranty policy. Confirm destination eligibility and the responsible service channel before publishing a fixed term.
Low-Voltage System Design
210A Battery Current Requires a Real DC Design
The 48V architecture can simplify battery sourcing, but a 10kW three-phase system still needs suitable parallel battery capacity, busbars, cables, isolation and protection.
Technical Buying Questions
Deye 10kW SG05LP3 Buying Questions
Is this the same as SUN-10K-SG04LP3-EU?
No. This page is for SUN-10K-SG05LP3-EU-SM2, the model listed in the current sellable quotation. Keep datasheets, firmware and accessories model-specific.
Can it use a LeforESS 51.2V battery?
Potentially, but compatibility cannot be assumed. Confirm the exact battery model, BMS protocol, firmware and Deye approved-battery status for the project.
Does 10kW mean 10kWh of storage?
No. 10kW is inverter power. Battery energy in kWh depends on the selected battery bank and usable depth of discharge.
Can it be used for backup power?
The model supports hybrid and off-grid operation, but the backed-up loads, surge demand, switching and protection design must be engineered for the site.