LIQUID-COOLED LOW-VOLTAGE ALL-IN-ONE ESS
AIO-1P8K16-LT 8kW + 16.08kWh All-in-One Energy Storage System
A compact single-phase solar-storage system combining an 8kW hybrid inverter with a 51.2V 314Ah LiFePO4 battery. It is intended for installers and project buyers who want one coordinated enclosure while keeping PV design, backup loads and grid compliance project-specific.
- 8kW single-phase output
- 16.076kWh LiFePO4
- Liquid-cooled architecture
- Floor-standing all-in-one system
Integrated system
A Cleaner Quote for 8kW Residential and Light-Commercial Storage
The main value is coordinated packaging: inverter, battery and thermal design are presented as one model. The site still needs load, PV, grid and protection engineering.
Solar self-consumption
Store surplus PV and schedule battery use around the site’s consumption pattern, subject to local grid and meter requirements.
Backup load support
Use for selected essential loads after confirming the peak demand, motor starting current and backup-circuit design.
Installer-ready product scope
A single integrated model simplifies product selection, but installation hardware, switchgear, CT/meter and commissioning scope must be quoted clearly.
Verified product data
AIO-1P8K16-LT Published Configuration
The table combines the current supply quotation with the manufacturer’s published model data. Final drawings and warranty terms should be requested before the page is published.
| System type | Low-voltage, single-phase, all-in-one solar energy storage system |
|---|---|
| Rated output power | 8,000W |
| Battery | LiFePO4, 51.2V, 314Ah, 16.076kWh nominal energy |
| Battery operating range | 46.4–57.6V |
| Cooling | Liquid-cooled architecture |
| Maximum PV input power | 12,000W |
| PV voltage | 500V maximum PV voltage; 150–425V MPPT range |
| MPPT | Two MPPT trackers |
| Grid connection | L / N / PE; 220V, 230V or 240V single-phase |
| Enclosure | IP65 published rating |
| Dimensions / weight | Approximately 1,220 × 670 × 188mm; 168kg — confirm the final mechanical drawing |
Sources: current LeforESS supply quotation, Bettenergy AIO-1P8K16-LT product page and published manufacturer/ENF datasheet data. Proposed new URL must be checked for availability before publication.
Product views
Real Product Visuals for Buyer Review
The images are derived from the quoted product, supplier material or official manufacturer documentation. They are not AI-redrawn product concepts.
Before quotation
Information Needed for an All-in-One ESS Quote
The site profile determines whether 8kW output and 16.08kWh storage are appropriate. Share the design inputs before treating the model as a fixed package.
- Daily energy use and peak power demand
- Essential backup loads and required backup hours
- PV module and string configuration
- Grid voltage, export-control and meter requirements
- Indoor/outdoor location and installation clearances
- Destination approvals, warranty and commissioning scope
Buyer questions
Practical Questions Before Ordering
These answers are intentionally specific about what must be checked before a distributor, installer or EPC order is confirmed.
Is 16.08kWh the usable energy?
It is the nominal battery energy. Usable energy depends on the configured depth of discharge, operating limits and reserve settings.
Can the system run the whole house during an outage?
Only if the selected backup loads and their surge demand stay within the system’s output and protection design. A load schedule is required.
Is everything needed for installation included?
Do not assume so. Confirm the meter/CT, external switchgear, cables, protection devices, mounting accessories and commissioning service in the quotation.
Can multiple units be paralleled?
The supply quotation mentions parallel operation, but the current limit, control method and approved unit count should be verified in the final manufacturer manual before publication.
Check Whether the 8kW + 16kWh Configuration Fits Your Site
Send the load profile, PV array, grid standard, backup requirement and installation location. LeforESS can then confirm the model, accessories, electrical design inputs and commercial scope.