10.24kWh Wall-Mounted LiFePO4 Battery
51.2V 200Ah 10.24kWh Wall-Mounted LiFePO4 Battery
MODEL · ELESHELL 10.2K
ELESHELL 10.2K is a 51.2V 200Ah LiFePO4 battery that stores 10.24kWh in one wall- or floor-mounted enclosure. It supports 100A maximum charge/discharge current, CAN, RS485 and RS232 communication, IP65 protection and up to 15 parallel units. It is intended for residential solar storage projects where inverter protocol, current limits and installation conditions are confirmed before ordering.
Best suited to solar distributors, residential ESS installers and project buyers needing more capacity per enclosure than a 5.12kWh battery.
Technical values are based on the supplied LeforESS catalog and remain subject to the selected model datasheet.
Capacity Step-Up
A 10.24kWh Platform for Residential Solar Storage
This model doubles the nominal energy of a 5.12kWh battery while remaining on the same 51.2V platform. Actual backup time still depends on usable energy, inverter efficiency and the selected loads.
Higher Daily Solar Use
Store a larger share of daytime PV generation for evening household consumption.
Longer Essential-Load Backup
Increase available energy for selected home loads after a load and runtime calculation.
Multi-Unit Residential Systems
Build a larger battery bank where the inverter, protection design and parallel configuration support it.
Verified Product Data
Electrical and Mechanical Data
Only the values stated for ELESHELL 10.2K on brochure page 9 are included.
| Electrical | Nominal voltage | 51.2V |
|---|---|---|
| Nominal capacity | 200Ah | |
| Nominal energy | 10.24kWh | |
| Maximum charge/discharge current | 100A | |
| Maximum parallel quantity | 15 units | |
| Battery | Chemistry | LiFePO4 |
| Cycle life | >6,000 cycles at 80% DoD and 25°C | |
| Cooling | Natural cooling | |
| Communication | Interfaces | RS485 / CAN / RS232 |
| Mechanical | Installation | Wall or floor mounting |
| Dimensions (H x W x D) | 871.1 x 519 x 133mm | |
| Weight | 92kg | |
| Environment | Operating temperature | 0-55°C |
| Protection | Protection level | IP65 |
| Certification | Listed in brochure | UN38.3, CE-EMC, IEC 62619, MSDS and RoHS |
Product specifications and configuration options must be confirmed against the selected model datasheet before ordering. The brochure places charge and discharge temperature values under a storage-temperature label. That row is excluded until the latest model datasheet confirms the correct field name.
Enclosure & Integration
Active-Balance Wall Battery Design
The brochure identifies laser-welded construction and cell active-balancing technology for this model. Their operating parameters should be confirmed in the selected datasheet and BMS documentation.
Technical Buying Questions
ELESHELL 10.2K Selection Questions
How does this model differ from ELESHELL 5K?
It provides 200Ah and 10.24kWh instead of 100Ah and 5.12kWh at the same nominal 51.2V platform. Runtime is not automatically doubled because system losses and load behaviour must be included.
Can it be installed on a wall or the floor?
Both wall and floor mounting are listed. Confirm wall strength, mounting hardware, service clearance and the final installation environment.
How many batteries can operate in parallel?
The brochure lists a maximum of 15 units. The final quantity depends on inverter support, protection, communication addressing and cable design.
Does IP65 make every outdoor location acceptable?
No. IP65 is the stated enclosure rating, but direct weather exposure, drainage, temperature, sunlight, mounting and local electrical rules still need review.
Which inverter brands are compatible?
No versioned brand matrix is provided on the product page. Compatibility must be confirmed from the exact inverter model, battery voltage range, current settings and communication protocol.